Restoring the Machine's Default LAN Settings to Perform Setup Again
Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Use the Menu button to select Device settings.
2
Use the [ or ] button to select LAN settings, then
press the OK button.
3
Select Reset LAN settings, then press the OK button.
4
Select Yes, then press the OK button.
5
Make sure that the screen shown to the right appears.
•
After a while, the Device settings screen returns. Press the
COPY button.
The LAN setting of the machine is now restored to the default state.
•
Perform setup again by following the procedures from "7 Set Up a Wireless Connection" in the
printed manual: Getting Started.
<Default State>
Wireless LAN
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP settings
Obtain an IP address automatically
0