Access Point Was Not Detected Is Displayed; Multiple Access Points With The Same Name Exist. Is Displayed - Canon MP560 - PIXMA Color Inkjet Network Setup Manual

Check 3
Are you using an access point that automatically creates WEP keys?
• For details on the access point, refer to the manual supplied with the access point or contact its
manufacturer.
Check the WEP key (hexadecimal) created automatically on the access point, then
enter it on the machine.
• For details on how to check the WEP key of the access point, refer to the manual supplied with
the access point or contact its manufacturer.
Glossary
• DHCP function
A function that automatically assigns required information (IP address, etc.) to computers connected to
the Internet.

Access point was not detected is Displayed

Check
The message appears when no access point is found.
Refer to "The Target Access Point is Not Displayed
(Detected)" on page 2.


Multiple access points with the same name exist. is Displayed

Check
The message appears when multiple access points with
the same name are found.
When you have only one access point
Select Use one AP only, then select the MAC address
of the target access point.
• For subsequent operations, go to step
the Access Point's Wireless LAN Settings Directly on the
Machine" on page 8.
• For details on how to check the MAC address of the access point, refer to the manual supplied
with the access point or contact its manufacturer.
When using multiple access points
Select Use multiple APs.
• For subsequent operations, go to step
Directly on the Machine" on page 8.
Glossary
• MAC address
A unique number assigned to each network device.
in "Entering
in "Entering the Access Point's Wireless LAN Settings