Restoring the Machine's Default LAN Settings to Perform Setup Again
Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
With Setup displayed on the HOME screen, press the right FUNCTION button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Reset LAN settings, then press the OK button.
5
Select Yes, then press the OK button.
6
Make sure that the completion screen appears, then press the OK button.
•
The LAN settings screen returns. Press the HOME button.
The LAN setting of the machine is now restored to the default state.
•
Perform setup again by following the procedures in "Wireless Setup" and onward in the printed
manual: Getting Started.
<Default State>
Wireless LAN
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP setting
Obtain an IP address automatically