Changing One Touch And Speed Dial Numbers - Brother MFC 7345N - Laser Multifunction Center User Manual

g
Choose one of the options below:
If you chose Color150dpi, Color300dpi, Color600dpi, Gray100dpi, Gray200dpi or
Gray300dpi in f, choose the file format (PDF or JPEG) that will be used to send your PC.
If you chose B&W200dpi (B/W200dpi) or B&W200x100 (B/W200x100) in f, choose the file format
(TIFF or PDF) that will be used to send to your PC.
Press OK.
h
Choose one of the options below:
To store another Speed Dial number go to b.
To finish storing Speed Dial numbers, press Stop/Exit.
Note
When you do a broadcast and you have saved a scan profile along with the number or E-mail address,
the scan profile of the One Touch, Speed Dial or Group number you choose first will be applied to the
broadcast.

Changing one touch and speed dial numbers

If you try to store a One Touch or Speed Dial number over an existing number, the LCD will show the name
or number already stored there. If your machine has a scheduled job or you have set a fax forwarding number,
the LCD will ask you if you want to change the number.
a
Do one of the following:
To change the stored number, press 1.
To exit without making a change, press 2.
#005:MIKE
1.Change 2.Exit
b
Press a or b to choose Fax/Tel, E-Mail or IFAX.
Press OK.
c
Enter a new number or character.
Press OK.
d
Press d or c to position the cursor under the character you want to change, and then press Clear/Back
to delete it. Repeat for each character you want to delete.
Fax operation
2
2
12