Machine Side: Steps Required To Use This Function (For The Administrator); Checking A Lan Cable For Connection; Checking The Network Settings; Configuring The Smb Send Environment - Konica Minolta bizhub C654 User Manual
Scan operations user guide
Hide thumbs
Also See for bizhub C654:
- User manual (474 pages) ,
- Quick start manual (158 pages) ,
- Manual (2 pages)
Table of Contents
Advertisement
3.2
Preparation for SMB Send
3.2.3
Machine side: Steps required to use this function (for the administrator)
Checking a LAN cable for connection
Check that a LAN cable is connected to the LAN port of this ma-
chine via the network.
Checking the network settings
Check that an IP address is assigned to this machine. Tap [Utility] - [Device Information], and check that an
IP address is displayed.
d
Reference
If no IP address is displayed, you need to configure the network. For details, refer to [User's Guide: Web Man-
agement Tool].
Configuring the SMB Send environment
Enable the SMB Send function. (You can use this function with the default settings unless otherwise request-
ed.)
How to configure the setting is explained using Web Connection. For details, refer to [User's Guide: Web
Management Tool].
bizhub C754/C654
3
3-14
Advertisement
Table of Contents
