[Original Settings] - Konica Minolta bizhub C654 User Manual

[Original Settings]

To display: [Scan/Fax] - [Application] - [No. of Originals] - [Original Settings]
Configure the setting so as to scan originals accurately according to the properties of the originals to be load-
ed.
Settings
[Original Setting]
[Despeckle]
[Blank Page Removal]
[Binding Position]
[Original Direction]
Related setting
- If blank pages are not detected correctly although [Blank Page Removal] has been specified to scan an
original, adjust the level to detect blank pages. For details, refer to page 12-10.
bizhub C754/C654
Description
Configure the setting so as to scan originals accurately according to the
properties of the originals to be loaded.
• [Mixed Original]: Even for an original with pages of different sizes, by
using the ADF, you can scan data while detecting the size of each
page. If the widths of the originals are the same, select [Same Width].
If the widths of the originals are different, select [Different Width].
• [Thin Paper Original]: Reduces the transport speed of the original on the
ADF to prevent the original from being caught when scanning an orig-
inal that is thinner than plain paper.
• [Z-Folded Original]: Even the original sizes of folded originals can be
detected accurately.
• [Long Original]: Select this option when loading a long original that is
larger in the feeding direction than the full standard size (11 e 17 or A3).
Scan an original using the ADF while removing dust from the Slit Scan
Glass.
It takes longer to finish scanning, compared to the normal operation.
Blank pages contained in the original loaded into the ADF are skipped
when the original is scanned.
Select this check box when scanning an original that contains blank pages.
Any blank pages that are detected are not counted as original pages.
When scanning a 2-sided original, select the original binding position to
prevent the binding positions being reversed between the front and rear
faces.
• [Auto]: The binding position is automatically set. A page margin position
along the long side of the paper is selected if the original length is 11-
11/16 inches (297 mm) or less. A page margin along the short side of
the paper is selected if the original length exceeds 11-11/16 inches
(297 mm).
• [Left Bind]: Select this option when the binding position is set to the left
of the original.
• [Top Bind]: Select this option when the binding position is set to the top
of the original.
Specify the orientation of the loaded original.
11
11-18