Operations Required To Use This Function; Checking A Lan Cable For Connection; Checking The Network Settings; Configuring The Internet Fax Environment - Konica Minolta bizhub C3850 User Manual

2.2

Operations required to use this function

2.2 Operations required to use this function

Checking a LAN cable for connection

Check that a LAN cable connected to the network is connected to the LAN port of this machine.

Checking the network settings

Print out the Configuration Page, then check that an IP address is assigned to this machine.
To print out the Configuration Page, select [Utility] - [User Settings] - [Printer Settings] - [Print Reports] - [Con-
figuration Page].
d
Reference
If no IP address is assigned to this machine, you will need to configure the network. For details, refer to Chap-
ter 4 "Initial Settings of This Machine" in [Quick Start Guide].

Configuring the Internet fax environment

Enable the Internet fax function. In addition, specify the information of this machine and settings required to
send and receive E-mail.
For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Ma-
chine" in [User's Guide Applied Functions].

Registering TTI

Register the machine name, company name, etc. to be printed on faxes.
To configure settings: [Utility] - [Administrator Settings] - [Fax Settings] - [Header Information] - [Sender]

Setting the date and time for the machine

Set the date and time on this machine to be printed on sent and received faxes.
To configure settings: [Utility] - [Administrator Settings] - [System Settings] - [Date & Time Settings]
d
Reference
If an NTP (Network Time Protocol) server is used to set the time, the date and time on this machine can be
adjusted automatically. For details, refer to Chapter 1 "Using Web Connection" in [User's Guide Applied
Functions].
[Network Fax Functions]
2
2-3