Configuring The Environment To Use The Ws Scan Transmission Function; Computer Side: Steps Required To Use This Function - Konica Minolta bizhub C654 User Manual

7.2 Preparation for WS scan

Configuring the environment to use the WS scan transmission function

Enable scanning using the Web service. Also, configure settings to detect this machine using the Web serv-
ice, define information of this machine used as a scanner, and specify how to connect to this machine.
How to configure the setting is explained using Web Connection. For details, refer to [User's Guide: Web
Management Tool].
7.2.3

Computer side: Steps required to use this function

Install a scanner driver required for WS scan transmission in a computer. Then, configure operations to be
performed after scan transmission, in the scanner driver. This example shows a procedure for Windows 7.
Before installation, from the [Start] menu, select [Control Panel] - [Network and Internet] - [Network and Shar-
ing Center] - [Advanced sharing settings], and check that [Network discovery] is enabled.
1
From the [Start] menu, click [Computer] - [Network].
This displays the devices connected to the network.
2
Right-click the scanner icon of this machine, and select [Install].
% Depending on the settings on the computer, the UAC (User Account Control) dialog box may ap-
pear. Check the details, and continue.
% If both of the scan and printer functions of the Web service are enabled on this machine, the ma-
chine is represented by the printer icon.
The driver is installed automatically. When the confirmation dialog box appears, click [Close].
bizhub C754/C654
7
7-4