Machine Side: Steps Required To Use This Function (For The Administrator); Checking A Lan Cable For Connection; Checking The Network Settings; Configuring The Smb Send Environment - Konica Minolta bizhub c554 User Manual

3.2 Preparation for SMB Send
3.2.3

Machine side: Steps required to use this function (for the administrator)

Checking a LAN cable for connection

Check that a LAN cable is connected to the LAN port of this ma-
chine via the network.

Checking the network settings

Check that an IP address is assigned to this machine. Tap [Utility] - [Device Information], and check that an
IP address is displayed.
d
Reference
If no IP address is displayed, you need to configure the network. For details, refer to [User's Guide: Web Man-
agement Tool].

Configuring the SMB Send environment

Enable the SMB Send function. (You can use this function with the default settings unless otherwise request-
ed.)
How to configure the setting is explained using Web Connection. For details, refer to [User's Guide: Web
Management Tool].
Tips
- In Mac OS X 10.7, configure the following setting.
– Set [SMB Authentication Setting] to [NTLM v1/v2]. For details, refer to [User's Guide: Web Management
Tool].
– Enable the direct hosting SMB service. (You can use this function with the default settings unless oth-
erwise requested.) For details, refer to [User's Guide: Web Management Tool].
– Synchronize the date and time, including the time zone, between the machine and your computer. For
details on how to set the date and time of the machine, refer to [User's Guide: Web Management Tool].
bizhub C554/C454/C364/C284/C224
3
3-9