Requirements for using License Activation Base Functions
You must prepare the followings to use the License Activation Base Functions.
Firmware for i-Option
Additional Memory: Additional Memory is included in Upgrade Kit (UK-201).
Token Certificate: Token Certificate is included in License Kit (LK-101/102/103).
About upgrade of firmware
You need to upgrade to firmware for i-Option to use functions of i-Option.
C650: DLBT0800064*
C550: DLBT0800065*
C451: DLBT0800066*
C353/C253/C203: DLBT0800114*
About firmware version for i-Option and upgrade procedure, please refer to
"Upgrade Procedure to i-Option" in PRI of above CSES numbers.
Without upgrade of firmware for i-Option, operation screen for activation is not
displayed on operation panel even if you purchase Token Certificate. Therefore,
you cannot use License Activation Base Functions.
After upgrade is completed, please refer to "Activation Procedure" and perform
Activation of License Activation Base Functions.
Upgrade Instruction and instruction when using functions added from
i-Option
Please refer to "Cautions" in the PRI of above CSES numbers.
Instruction for part replacement
If you need replacement of NVRAM or Service EEPROM, please exchange it for new
one.
Issued by BT-CSO
9
Ver 1.03