Flow chart for Repair
There are 3 steps to perform Repair.
1.
Gather information from MFP
2.
Access to LMS
3.
MFP Repair
The following is the flow chart for the Repair.
Prepare MFP
Get
[Serial Number]
[Request Code]
[Repair Request Code
(Repair Demand Code)]
Enter the following information on LMS.
[Serial Number]
[Request Code]
[Repair Request Code (Repair Demand Code)]
Receive [Repair Code] from LMS.
Input the [Repair Code] in MFP
through the control panel.
If license management error displayed after the replacement
of NVRAM, the activated functions before the replacement will
be displayed. To use the function, please reactivate the
function by performing activation operation.
Issued by BT-CSO
Light blue
Yellow
Pink
Confirm that access to LMS using
Web browser is possible.
Access to LMS using Web browser.
Complete Repair Operation
47
Prepare PC
Ver 1.03