Konica Minolta bizhub C451 Operation Manual page 62

1. Gather necessary information
1-1. Get [Request Code] and [Serial Number] from MFP.
•MFP panel <Service Mode> •PSWC
Acquisition procedure: MFP panel <Administrator Mode>
2. Prepare Initialization
3. Perform Initialization
• Get [Request Code] and [Serial Number] from MFP panel <Service Mode>.
a) Enter in Service Mode, and then press
"Stop","9". The "Billing Setting" screen will
appear.
Select [License Management].
b) Select [Request Code].
c) Print out displayed [Request Code] and
[Serial Number], or write them down.
If you press Start button, they are printed out.
*Please pay attention "U" and "V", "0 (number)"
and "O (alphabet)".
"0 (number)" is not used in [Request Code].
d) Exit from Service Mode and go on to the
next step [2. Prepare Initialization].
Issued by BT-CSO 62 Ver 1.03