Sending Document Data To The Image Server; To Send A Document To The Mail Box - Canon IR5000 - iR B/W Laser Driver Manual

Sending Document Data to the Image Server

Document data can be sent to the Mail Box (Available for imageRUNNER 6000/5000, iR3250, imag-
eRUNNER 600/550/60 and imageRUNNER 400/330) or registered as an Image Form (Available for
imageRUNNER 600/550/60).

To send a document to the Mail Box

1
Select Store from the drop-down list box at the upper right in either the Page Setup, Fin-
ishing, Paper Source or Quality sheet.
2
Click the Yes button in the message
box, or click the Store Destination icon
button to open the Store Destination
dialog box.
3
Specify the name of the data to send to the Mail Box, and then specify the Box Number of
the Mail Box.
NOTE
• For imageRUNNER 6000/5000 and imageRUNNER 600/550/60, clicking the Proof Print check box
prints a copy of the document at the same time as sending the document to the Mail Box.
4
Click the OK button.
NOTE
• For imageRUNNER 400/330, the Mail Box option is available only when the extended memory is installed
in the printer.
• For imageRUNNER 400/330, you must first select the Enable Mail Box check box in the Configuration
sheet (Windows 95/98) or the Device Settings sheet (Windows NT4.0/2000).
• The Mail Box name can be acquired by clicking the Get Device Status button in the Configuration sheet
(Windows 95/98) or the Device Settings Sheet (Windows NT4.0/2000).

Sending Document Data to the Image Server

3-25