Manual Color Correction Reference Print - Tektronix Z740/N - Phaser 740 Color Laser Printer Service Manual

Manual color correction reference print

4.
Overlay and compare the pre-printed primary Color Density Samples in the
Phaser 740 Color Printer User Guide to the selected colors on the midline of
the print. If any primary color does not match, overlay and compare to an
alternate color. Note the number, -10 to +10, referenced to the alternate
choice.
5.
Press the right arrow on the front panel to scroll to the Adjust < color >:+0
menu for the primary color you wish to change.
6. Press the arrow keys to increment the displayed value (from -10 to +10) to
match the alternate color selected from the reference print. Then press OK.
An "*" indicates the selected value.
7.
Repeat Step 4 through 6 for any other color that needs adjustment.
8. Press Exit to leave the Color Calibration menus.
Color Reference Page
Cyan Magenta
-4
-2
-9
0
+2 -7
+4 -5
+6
-3
+8
-1
+10 +1
+3
+5
+7
Yellow
-6
-4 -9
-2 -7
0 -5
+2 -3
+4 -1
+6 +1
+8 +3
+10 +5
+7
+9
Service Guide
Black
9698-18
61