Figure 9-4 Manual Color Correction Reference Print - Tektronix Phaser 550 Service Manual

5. Press Print to print a reference print showing the printer's current
selections for each primary color. The currently selected colors are
oriented through the midline of the page with the alternate choices
extended above and below them.
Color Calibration Page
Cyan
0
+2
+4
+6
+8
+10

Figure 9-4 Manual color correction reference print

6. Overlay and compare the pre-printed primary colors on the Phaser 550
Quick Reference Card to the selected colors on the midline of the print.
If any primary color does not match, overlay and compare to an
alternate color. Note the number, -10 to +10, referenced to the
alternate choice.
7. Press the right arrow on the front panel to scroll to the Adjust
< color >:+0 menu for the primary color you wish to change.
8. Press the arrow keys to increment the displayed value (from
-10 to +10) to match the alternate color selected from the reference
print. Then press OK. An "*" indicates the selected value.
9. Repeat Step 6 through 8 for any other color that needs adjustment.
10. Press Exit to leave the Color Calibration menus.
Magenta Yellow
-6
-4 -9
-9 -2 -7
-7 0 -5
-5 +2 -3
-3 +4 -1
-1 +6 +1
+1 +8 +3
+3 +10 +5
+5 +7
+7 +9
Checks and Adjustments
Black
9317-53
Service Manual 9-33
9