Residual Image At 75 Mm Intervals (2); Residual Image At 32 Mm Intervals; Residual Image At 57 Mm Intervals - Lexmark E210 - Optra B/W Laser Printer Service Manual

4510-001

Residual Image at 75 mm Intervals (2)

Description: Residual image occurs at 75
mm intervals when printing card stock or
transparencies.
Possible cause:
•
Software not set to card stock or
transparency mode

Residual Image at 32 mm Intervals

Description: Residual image occurs in the
black image printing at 32 mm intervals.
Possible causes:
•
Toner cartridge failure
•
Bad or dirty high voltage contacts

Residual Image at 57 mm Intervals

Description: Residual image occurs at 57
mm intervals.
Possible causes:
•
Fuser temperature maintained too
high. Check for toner buildup on hot
roller and thermistor surface. Clean
or replace fuser if necessary.
2-4
Service Manual