Paper Feed Problems - Lexmark M1246 User Manual

Troubleshooting
All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable
results if third-party supplies or parts are used. Imaging component usage beyond the intended life may
damage your Lexmark printer or associated components.
Warning—Potential Damage: Use of third-party supplies or parts can affect warranty coverage.
Damage caused by the use of third-party supplies or parts may not be covered by the warranty.
To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your
printer, from the control panel, press and hold X and
If you do not want to accept these risks, then remove the third-party supply or part from your printer and
install a genuine Lexmark supply or part. For more information, see
supplies" on page
If the printer does not print after pressing and holding X and
the supply usage counter.
1
From the control panel, navigate to:
Settings >
Counters >
2
Select the part or supply that you want to reset, and then select Start.
3
Read the warning message, and then select Continue.
4
Press and hold X and
Note: If you are unable to reset the supply usage counters, then return the item to the place of
purchase.

Paper feed problems

Envelope seals when printing
Action
Step 1
a
Use an envelope that has been stored in a dry environment.
Note: Printing on envelopes with high moisture content can
seal the flaps.
b
Send the print job.
Does the envelope seal when printing?
66.
> Device > > Maintenance >
simultaneously for 15 seconds to clear the message.
simultaneously for 15 seconds.
"Using genuine Lexmark parts and
simultaneously for 15 seconds, then reset
> Config Menu >
Yes
Go to step 2.
> Supply Usage And
No
The problem is
solved.
97