Table of Contents
Advertisement
Monitor Warning Messages
Message
Error message: OUT OF RANGE
Self diagnostics message: NO
SIGNAL
Elo Entuitive Touchmonitor
Suggestion
The graphics adapter is set for a refresh rate or a line
frequency that is too high. Select another display mode
with lower frequencies as directed by your video card
vendor.
This message indicates that the signal is missing or
faulty. Check that the signal cable connector is properly
connected and that the connection pins are not bent or
damaged. If the connector is loose, tighten the connector
screws. Check that the PC is powered on.
CRT Desktop User Guide - 21
Advertisement
Table of Contents
Need help?
Do you have a question about the Entuitive ET1525C Series and is the answer not in the manual?