Elo TouchSystems Entuitive ET1525C Series User Manual page 14

4. Power on your monitor using the Soft power switch and check
5. After a brief pause the picture should appear. If necessary, adjust
6. Insert the Elo TouchTools CD-ROM in your computer's CD-
Elo Entuitive Touchmonitor
that the power LED is on, then power on your PC. If not, repeat
steps 2, 3, and 4, or refer to Chapter 4, Troubleshooting.
Power LED
the front panel controls according to your personal preference
(see Chapter 3).
ROM drive to install the appropriate touchscreen driver soft-
ware. Follow the directions starting on the next page to install
the driver software.
Connecting Your Touchmonitor
Soft Power Switch
CRT Desktop User Guide - 9