What To Do If; Cleaning The Drum; Clean Operating Screen And Housing; Troubleshooting By Yourself - Electrolux TK SL5 E User Manual

24 electrolux
7. Turn the valve/filter in ON position.

Cleaning the drum

Caution! Do not use abrasives or steel
wool to clean the drum.
Lime in the water or cleaning agents may
form a barely visible lining on the inside
of the drum. The degree to which the
laundry has been dried is then no longer
detected reliably. The laundry is damper
than expected when removed from the
dryer.

What to do if ...

Troubleshooting by yourself

If, during operation, the warning message
appears on the LCD follow strictly guides in-
Problem
Dryer does not work.
ProSteam programme does not
start. Message on the display:
The steam water tank is empty.
Please fill it and then press
START.
After a ProSteam programme,
garments are not sufficiently
smooth.
After a ProSteam programme,
there are no creases left in the
garments.

Clean operating screen and housing

cluded in the massage on the display. If you
are not able to solve the problem, please in-
form your local service force centre.
Possible cause
Mains plug is not plugged in or
fuse is not working correctly.
Loading door is open.
Have you pressed the Start /
Pause button?
Water tank is empty.
Recirculation valve is closed
(OFF position)
Wrong programme selected
(e.g. Mischgewebe (SYNTHET-
ICS) instead of Baumwolle
(COTTON)).
Too low a steam level set.
Too many garments in machine,
or garments that are too differ-
ent.
Clothes are not removed until
the anti-crease phase is finish-
ed.
Garments not hung on clothes
hangers and/or not tugged into
shape.
Multi-layered garments tend to
lose their shape.
The ProSteam programme has
the effect of smoothing gar-
ments.
Use a standard domestic cleaner (e.g.
vinegar-based cleaner) to wipe down the
inside of the drum and drum ribs.
Caution! Do not use furniture cleaners
or aggressive cleaning agents to clean
the machine.
Use a damp cloth to wipe down the op-
erating screen and housing.
Plug in at mains socket. Check
fuse in fuse box (domestic in-
stallation).
Close loading door.
Press the Start / Pause button
again.
Fill water tank.
Turn the recirculation valve to
ON position.
Note the composition of the fab-
ric.
Set a higher steam level.
Load the machine with fewer
garments, or only similar ones.
Remove clothes quickly one at a
time from the machine as soon
as possible after the start of the
anti-crease phase.
Hang garments on clothes
hangers, do up buttons and tug
garments into shape.
Reshape multi-layered gar-
ments by ironing after they come
out of the machine.
Iron creases in again after the
ProSteam programme.
Remedy