iQ Series,
Ultrasonic Hand Held Systems User's Manual
LCD Display Overview
There are two basic kinds of screen displays:
Operate
screens, and
An Operate screen tells the operator
what happened in the last weld cycle.
An In Cycle screen activates when the probe activation
switch (trigger) is pressed.
Page 0
In Cycle
screens.
Data from
last weld
cycle.
# 2
Setup
number.
Figure 4-4 Example of an Operate Screen
Stack Frequency
# 2
Power Draw
Figure 4-5 Example of an In Cycle Screen
Manual Weld
Weld Time 0.500 S
Weld Energy 18 J
*
Asterisk indicates setup
is modified but not
stored in memory.
Status Indication
IN CYCLE
Frequency: 40087 Hz
Power:
25 W
Power Bar Graph %
Weld Mode -
Manual, Time, or
Energy
Dukane Manual Part No. 403-577-01