Table of Contents
Advertisement
Rear defogger control
The rear defogger output can be remotely turned on/off any time using the
remote control. The default setting is On.
To turn the rear defogger output OFF:
1.
Press & release the
trol.
2.
The parking lights will flash 2-times.
3.
The rear defogger output will no longer activate when the vehicle is remote
engine started.
�������
Note: If the remote engine start is On the lights will turn off then flash 2-times
before returning to their normal output and the defogger output, if active, will
cease.
To turn the rear defogger output ON:
1.
Press & release the
trol.
2.
The parking lights will flash 3-times.
3.
The rear defogger output will once again activate when the vehicle is
remote engine started.
�������
Note: If the remote engine start is On the lights will turn off then flash 3-times
before returning to their normal output and the defogger output will activate as
programmed.
48
and
and
�������
and
and
�������
© 2008 Directed Electronics. All rights reserved.
buttons of the remote con-
buttons of the remote con-
Advertisement
Table of Contents
