Directed Electronics Xpresskit Xpressparts Series Quick Start Manual

MODEL: AstroStart RS-623
2-Way Remote Start System with 1500 Feet Range
Affordable 2 way communication with 1500 feet range*, Simple LED read out for confirmation of command
and True confirmation of start via transmitter.

USING YOUR REMOTE CONTROL

To ensure that commands are transmitted properly, press the desired button for 2
seconds. A command will not be executed if you do not press the button long
enough.
The indicator light will flash while transmitting the command.
The remote included in your kit may differ from the one illustrated.

TABLE OF COMMANDS

C
OMMANDS
S (B > 4 .)
TOP UTTON HELD IN SEC
S
TART
P (B > 4 .)
ANIC UTTON HELD IN SEC
T / A
RUNK CCESSORY
U
NLOCK
L
OCK
A
UX 1
B
UTTONS
The remote transmits a visual confirmation by means of an LED.
Immediately following a transmission, the LED will flash (single blink)
green if the command was successfully received by the system or red if
the command was not received.
OR
In the case of a start command, the LED provides a first confirmation to
acknowledge the command reception by the system then, a second
confirmation is sent to indicate if the starting was successful or not.
Rev.: 20091028
TECHNICAL SUPPORT / INFORMATION
web resources:
www.xpresskit.com
www.xpressvip.com
www.directechs.com
© 2009 Directed Electronics. All rights reserved.
Page 1