Feature Menus; Menu 1; Menu 2 - Directed Electronics ProSecurity RK20 Installation Manual

Feature menus

The default settings are indicated in bold type. The number in parentheses indi-
cates the number of times the LED flashes.

➤ Menu 1

FeatUre Led on SettIng (deFaULt)
nUmber (PreSS cHanneL 1)
1
Horn Honk Pulses oFF
2
Ignition Lock oFF
3
Ignition Unlock oFF
4
door Lock Pulse duration 0.8 seconds
5
Unlock output 1 pulse
6
Lock output 1 pulse
7
Factory alarm disarm Function w/Unlock
8
Factory alarm disarm 1 pulse
9
comfort closure oFF
10 Panic mode on
NOTE: The numbers in the parantheses indicate the number of times the LED will flash.

➤ Menu 2

FeatUre Led on SettIng (deFaULt)
nUmber (PreSS cHanneL 1)
1 Intelli-tach
12 minutes run time
2
Constant Parking Light output
3
cranking time 0.6 sec
4
5 activation Pulse: 1
Ignition/accessory output: Ignition
6
accessory State during Wait to Start: oFF Accessory State During Wait to Start: ON
7
2nd Status output: normal
8
9 anti-grind on
10 Wait to Start timer = 0 Sec
NOTE: The numbers in the parantheses indicate the number of times the LED will flash.
42
Led oFF SettIng
(PreSS cHanneL 2)
20ms (2), 30ms (3), 40ms (4), 50ms (5)
Ignition Lock ON
Ignition Unlock ON
3.5 (2) , 0.4 (3) seconds
Unlock Output 2 pulses .
Lock Output 2 pulses
Before Unlock (2), Remote Start Only (3)
2 pulses
Version
(1), Comfort Closure Version 2 (3)
Panic Mode OFF
Led oFF SettIng
(PreSS cHanneL 2)
Voltage (2), off (3), Tachometer (4)
24 Minutes (2), 60 Minutes (3)
Flashing Parking Light Output
Cranking Time 0.8 (2), 1.0 (3), 1.2 (4),
1.4,(5)1.6 (6), 1.8 (7), 2.0 (8), 4.0 (9)sec.
Activation Pulses: 2 (2) , 3 (3)
Ignition/Accessory Output: Accessory
Rear Defogger Latched (2), Pulsed (3)
Anti-grind OFF
15 (2), 30 (3), 45 (4) seconds
© 2008 Directed Electronics. All rights reserved.