To Access Another Feature; To Exit The Learn Routine; Features Menu - Directed Electronics 100 ESP Installation Manual

to access another feature

You can advance from feature to feature by pressing and releasing the Valet
necessary to get from the feature you just programmed to the feature you wish to access. For example, if you just
programmed Feature 1 for passive arming and you want to program Feature 2 (Arm/Disarm Confirmation Honks):
1. Release the Valet ® /Program switch.
2. Press and release the Valet/Program switch once to advance from Feature 1 to Feature 2.
3. Press the Valet ® /Program switch once more and hold it.
4. The LED will flash in groups of two and the horn will honk twice (if connected) to confirm that you have
accessed Feature 2.

to exit the learn routine

The learn routine will be exited if:
The ignition is turned on.
The Valet ® /Program switch is pressed too many times.
More than 15 seconds elapses between steps.
One long horn honk (if connected) indicates that the Learn Routine has been exited.

features menu

FEATURE DEFAULT LED ON SETTINGS
NUMBER (PRESS CHANNEL 1 TRANSMITTER BUTTON) (PRESS CHANNEL 2 TRANSMITTER BUTTON)
1 Active arming
2 Arm/disarm confirmation honks ON
3 Ignition-controlled door lock ON
4 Ignition-controlled door unlock ON
5 Active locking
6 Ignition-controlled domelight ON
7 0.8 second door lock pulses
8 Double pulse unlock OFF
9 Security features ON
10 Code Hopping ON
© 1999 Directed Electronics, Inc. Vista, CA
® /Program switch the number of times
LED OFF SETTINGS
Passive arming
Arm/disarm confirmation honks OFF
Ignition-controlled door lock OFF
Ignition-controlled door unlock OFF
Passive locking
Ignition-controlled domelight OFF
3.5 second door lock pulses
Double pulse unlock ON
Security features OFF
Code Hopping OFF
21