Table of Contents
Advertisement
What is WPA-PSK?
WPA-PSK (Wi-Fi Protected Access Pre-Shared Key) can be used if user do not have a Radius server but
still want to benefit from it. Because WPA-PSK only requires a single password to be entered on wireless
AP/gateway and wireless client. As long as the passwords match, a client will be granted access to the
WLAN.
Trouble Shooting
For general device installation or basic trouble shooting please refer to the device user's guide
Using Embedded Packet Trace
Embedded Packet Trace
The Prestige packet trace records and analyzes packets running on LAN and WAN interfaces. It is designed for
users with technical backgrounds who are interested in the details of the packet flow on LAN or WAN end of
Prestige. It is also very helpful for diagnostics if you have compatibility problems with your ISP or if you want
to know the details of a packet for configuring a filter rule.
The format of the display is as following:
Packet:
0
11880.160 ENET0-R[0062] TCP 192.168.1.2:1108->192.31.7.130:80
[index] [timer/second][channel-receive/transmit][length] [protocol] [sourceIP/port] [destIP/port]
There are two ways to dump the trace:
1. Online Trace--display the trace real time on screen
2. Offline Trace--capture the trace first and display later
The details for capturing the trace in CLI command are as follows.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2802HW(L)-Ix Support Notes
161
Advertisement
Table of Contents
