ZyXEL Communications Prestige 2802HW(L)-IX Support Notes page 117

Setup perform specific actions on calls from specific numbers. If a caller's number
does not match the Incoming Call Number of any of these entries, the
Prestige performs the default action configured in the Forward to Number
Setup section.
Activate Select this check box to turn on an call forwarding entry.
You can set the Prestige to take a particular action on incoming calls from a
Incoming Call
number that you specify here.
Number
You can set the Prestige to forward incoming calls to a number that you
Forward to
specify here.
Number
Condition Select under what circumstances you want the Prestige to use this call
forwarding entry.
Select Unconditional to have the Prestige immediately forward any calls
from the number specified in the Incoming Call Number field to the
number in the Forward to Number field.
Select Busy to have the Prestige forward any calls from the number
specified in the Incoming Call Number field to the number in the Forward
to Number field when your SIP account has a call connected.
Select No Answer to have the Prestige forward any calls from the number
specified in the Incoming Call Number field to the number in the Forward
to Number field when the No Answer Waiting Time period expires
(whether or not the no answer feature is enabled in the Forward to
Number Setup section).
Select Block to have the Prestige reject calls from the number specified in
the call forwarding entry.
Select Accept to have the Prestige allow calls from the number specified in
the Incoming Call Number field.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2802HW(L)-Ix Support Notes
117