ZyXEL Communications Prestige 2802HW(L)-IX Support Notes page 180

The Prestige packet trace records and analyzes packets running on LAN and WAN interfaces. It is designed for
users with technical backgrounds who are interested in the details of the packet flow on LAN or WAN end of
Prestige. It is also very helpful for diagnostics if you have compatibility problems with your ISP or if you want
to know the details of a packet for configuring a filter rule.
The format of the display is as following:
Packet:
0 11880.160 ENET0-R[0062] TCP 192.168.1.2:1108->192.31.7.130:80
[index] [timer/second][channel-receive/transmit][length] [protocol] [sourceIP/port] [destIP/port]
There are two ways to dump the trace:
1. Online Trace--display the trace real time on screen
2. Offline Trace--capture the trace first and display later
The details for capturing the trace in CLI command are as follows.
Online Trace
1. Trace LAN packet
2. Trace WAN packet
1. Trace LAN packet
1.1 Disable to capture the WAN packet by entering:
1.2 Enable to capture the LAN packet by entering:
1.3 Enable the trace log by entering:
1.4 Display the brief trace online by entering:
or
1.5 Display the detailed trace online by entering:
Example:
ras> sys trcp channel mpoa00 none
sys trcp sw on
sys trcd brief
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2802HW(L)-Ix Support Notes
sys trcp channel mpoa00 none
sys trcp channel enet0 bothway
&
sys trcl sw on
sys trcd parse
180