Using Syslog - ZyXEL Communications Prestige 2802HW(L)-IX Support Notes

Enter the IP address of the NMS that you wish to send the traps to. If 0.0.0.0 is
Destination
entered, the Prestige will not send trap any NMS manager.

Using syslog

4. Prestige Setup
Configuration:
1. Click Active to enable Syslog logging.
2. Syslog IP Address, enter the IP address of the UNIX server that you wish to send the syslog.
3. Log Facility, select the location from the drop down list box. The log facility allows you to log the messages
to different files in the syslog server. Refer to the syslog server manual for more information.
•
UNIX Setup
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2802HW(L)-Ix Support Notes
48