Main Menu; Table 2-2 Main Menu Commands - ZyXEL Communications Prestige 314 User Manual

Operation Keystrokes
Move down to [ENTER]
another menu
Move up to a [Esc]
previous menu
Move to a "hidden" Press the [SPACE
menu BAR] to change
No to Yes then
press [ENTER].
[ENTER] or
Move the cursor
[Up]/[Down] arrow
keys
Enter information Fill in, or
Press the [SPACE
BAR] to toggle
Required fields <? >
N/A fields <N/A>
[ENTER]
Save your
configuration
Type 99, then
Exit the SMT
press [ENTER].

2.5.1 Main Menu

After you enter the password, the SMT displays the Prestige 314 Main Menu, as shown below.
Hardware Installation and Setup
P314 Broadband Sharing Gateway with 4-Port Switch
Table 2-2 Main Menu Commands
Description
To move forward to a submenu, type in the number of the
desired submenu and press [ENTER].
Press the [Esc] key to move back to the previous menu.
Fields beginning with "Edit" lead to hidden menus and have a
default setting of No. Press the [SPACE BAR] to change No to
Yes, then press [ENTER] to go to a "hidden" menu.
Within a menu, press [ENTER] to move to the next field. You can
also use the [Up]/[Down] arrow keys to move to the previous and
the next field, respectively.
You need to fill in two types of fields. The first requires you to
type in the appropriate information. The second allows you to
cycle through the available choices by pressing the [SPACE
BAR].
All fields with the symbol <?> must be filled in order be able to
save the new configuration.
Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
Save your configuration by pressing [ENTER] at the message
[Press ENTER to confirm or ESC to cancel]. Saving the data on
the screen will take you, in most cases to the previous menu.
Type 99 at the Main Menu prompt and press [ENTER] to exit the
SMT interface.
2-5