Figure 1-1 Internet Access; Figure 3-2 Menu 3.2 - Tcp/Ip And Dhcp Ethernet Setup; Table 3-1 Lan Dhcp Setup Menu Fields - ZyXEL Communications Prestige 314 User Manual

Press Space Bar to Toggle.
Figure 3-2
Follow the instructions in the following table on how to configure the DHCP fields.
Field
This field enables/disables the DHCP server. If it is set to Server,
DHCP=
your Prestige will act as a DHCP server. If set to None, DHCP
service will be disabled and you must have another DHCP sever
on your LAN, or else the workstation must be manually
configured. When DHCP is set to Server, the following four items
need to be set.
Client IP Pool This field specifies the first of the contiguous addresses in the IP
Starting Address address pool.
Size of Client IP Pool This field specifies the size, or count, of the IP address pool.
Primary DNS Enter the IP addresses of the DNS servers. The DNS servers are
Server passed to the DHCP clients along with the IP address and the
Secondary DNS subnet mask. Leave these entries at 0.0.0.0 if they are provided
Server by a WAN DHCP server.
Follow the instructions in the following table to configure TCP/IP parameters for the LAN port.
Internet Access
P314 Broadband Sharing Gateway with 4-Port Switch
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server
Configuration:
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= IGMP-v2
Press ENTER to Confirm or ESC to CANCEL:
Menu 3.2 – TCP/IP and DHCP Ethernet Setup
Table 3-1 LAN DHCP Setup Menu Fields
Description Example
None
Server (default)
192.168.1.33
32
3-5