Configuring A Filter Set; Figure 7-3 Menu 21 - Filter Set Configuration - ZyXEL Communications Prestige 314 User Manual

P314 Broadband Sharing Gateway with 4-Port Switch
7.2

Configuring a Filter Set

To configure a filter set, follow the procedure below.
Step 1.
Select option 21. Filter Set Configuration from the Main Menu to open Menu 21.1
Filter
Set #
------
1
2
3
4
5
6
Figure 7-3
Step 2. Select the filter set you wish to configure (no. 1-12) and press [ENTER]
Step 3.
Enter a descriptive name or comment in the Edit Comments field and press [ENTER].
Step 4. Press [ENTER] at the message: [Press ENTER to confirm] to open Menu 21.1 – Filter Rules
Summary.
7-4
Menu 21 - Filter Set Configuration
Comments
-----------------
NetBIOS_WAN
NetBIOS_LAN
Tel_FTP_Web_WAN
_______________
_______________
_______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
Menu 21 – Filter Set Configuration
Filter
Set # Comments
------ -----------------
7 _______________
8 _______________
9 _______________
10 _______________
11 _______________
12 _______________
.
Filter Configuration