Configuring A Server Behind Sua - ZyXEL Communications Prestige 314 User Manual

For more information on configuring supporting applications behind SUA refer to the
ZyNOS Support Note documentation on your Support Disc.

6.2.1 Configuring a Server behind SUA

Follow the steps below to configure a server behind SUA:
Step 1
Enter 15 in the Main Menu to go to Menu 15 – Multiple Server Configuration.
Step 2 Enter the service port number in the Port # field and the inside IP address of the server in the IP
Address field.
Step 3 Press [ENTER] at the "Press ENTER to confirm ..." prompt to save your configuration after you
define all the servers or press ESC at any time to cancel.
The most often used port numbers are:
6-4
P314 Broadband Sharing Gateway with 4-Port Switch
Menu 15 - Multiple Server Configuration
Port # IP
---- ---------------
.
1 Default 0.0.0.0
0.0.0.0
2. 0
3. 0 0.0.0.0
0.0.0.0
4. 0
0.0.0.0
5. 0
0.0.0.0
6. 0
0.0.0.0
7. 0
0.0.0.0
8. 0
0.0.0.0
9. 0
0.0.0.0
10. 0
0.0.0.0
11. 0
RR Reserved
12. 1026
Press ENTER to Confirm or ESC to Cancel:
Figure 6-3
Address
Menu 15
SUA Server Setup