Example Filter; Figure 7-10 Telnet Filter Example - ZyXEL Communications Prestige 314 User Manual

Once you have completed filling in Menu 21.4.1.1 – Generic Filter Rule, press [ENTER] at the message
[Press ENTER to Confirm] to save your configuration, or press [ESC] to cancel. This data will now be
displayed on Menu 21.1.1 – Filter Rules Summary.
7.3

Example Filter

Let's look at the first rule in the third default ZyXEL filter set, TELNET_FTP_Web_WAN (see Figure 7-6)
as an example. Please see our PNC Disk for more example filters. This filter is designed to block outside
users telnetting into the Prestige.
Step 1.
Enter 21 from the Main Menu to open Menu 21 – Filter Set Configuration.
Step 2. Enter the index of the filter set you wish to configure (in this case, 3) and press [ENTER]
Step 3.
Enter a descriptive name or comment in the Edit Comments field (in this case
TELNET_FTP_Web_WAN) and press [ENTER].
Step 4. Press [ENTER] at the message: [Press ENTER to confirm] to open Menu 21.3.1 – Filter Rules
Summary.
Step 5. Enter 1 to configure the first filter rule (the only filter rule of this set). Make the entries in this
menu as shown in the following figure.
Filter Configuration
P314 Broadband Sharing Gateway with 4-Port Switch
Figure 7-10 Telnet Filter Example
.
7-13