Stand Mode Triggered Timeout - Datalogic Gryphon I GD4100 Product Reference Manual

Stand Mode Triggered Timeout

This feature specifies the time to remain in
in Stand
Stand Mode Triggered Timeout = 0.5 Seconds
Stand Mode Triggered Timeout = 2 Seconds
Stand Mode Triggered Timeout = 4 Seconds
Product Reference Guide
Mode.
This timeout is only used when the Scan Mode is configured as
.
Mode
NOTE
ENTER/EXIT PROGRAMMING MODE
Trigger Single mode after the trigger is pulled while
DEFAULT
Stand Mode Triggered Timeout = 1.5 Seconds
Stand Mode Triggered Timeout = 3 Seconds
Scanning Features
Stand
39