Error Codes
Upon startup, if the reader sounds a long tone, this means the reader has not passed its
automatic Selftest and has entered FRU (Field Replaceable Unit) isolation mode. If the reader is
reset, the sequence will be repeated. The following table describes the LED flashes/beep codes
associated with an error found.
NUMBER OF
LED FLASHES/
Product Reference Guide
BEEPS
1
Configuration
2
4
Reader Module
5
Laser Pointer (if so equipped)
6
14
CPLD/Code Mismatch
ERROR
Interface PCB
Contact Helpdesk for assistance
Digital PCB
LED and Beeper Indications
CORRECTIVE ACTION
287