Troubleshooting Guide - Smooth Fitness V2300 Owner's Manual

"C T
ONSOLE
PROBLEM POSSIBLE CAUSE
1.
The connection
between the
Circuit Board and
the LCD
Membrane is
loose.
2.
Gently press
down on the LCD
Screen, if the
partial display
disappears, then
it is a connection
problem
The LCD
Screen
Partially
The Rubber
Displays Membranes between
the Circuit Board and
the LCD Screen is
misaligned/not in a
same line. You might
be able to see that
the LCD Screen is on
a slight angle and
NOT inline or parallel
with the Console
Cover
The Computer is
faulty
S
ROUBLE HOOTING
SOLUTION
Verify that the Circuit Board is securely fastened to the Computer Case. Retighten the
Screws. Take care NOT to over tighten the Screws as this may destroy the Circuit
Board. You just need to keep the Circuit Board firm, STOP tightening screw when you
meet resistance
1.
Open the Console.
2.
Remove the Circuit Board's Screws, gently remove the Circuit Board, Re-align the
LCD screen and the Rubber Membrane.
3.
Reassemble the Circuit Board and taking care not to bump or knock the Rubber
Membrane out of alignment before the Circuit Board Screws are tight. You just
need to keep the Circuit Board firm, STOP tightening screws when you meet
resistance
Replace the Computer
G "
UIDE
21