Advertisement
1. Carefully remove the rubber plug from
the center of the headlight switch cover as
it will be reused in the new switch cover. A
needle nose pliers works well for this.
3. Use the original screw to hold the new
light switch cover in place. Tighten firmly.
UTV- 6120
Installation Instructions
2. Remove the Phillips screw holding the
original head light switch cover in place.
Manual # 650262
Advertisement
Table of Contents
Related Manuals for Dakota Digital UTV- 6120
Summary of Contents for Dakota Digital UTV- 6120
-
Page 1: Installation Instructions
UTV- 6120 Installation Instructions 1. Carefully remove the rubber plug from the center of the headlight switch cover as it will be reused in the new switch cover. A needle nose pliers works well for this. 2. Remove the Phillips screw holding the original head light switch cover in place. -
Page 2: Service And Repair
12 months from date of original purchase. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with the sale of this product.
Need help?
Do you have a question about the UTV- 6120 and is the answer not in the manual?
Questions and answers