Smart Technologies Parts Kit for SMART Board 560 Configuration And User's Manual page 64

7. Put the outer lamp cover back into its
original position.
Re-attaching the Projector
WARNING
Two people are required to mount the projector.
To re-attach the projector to the boom
1. Align the hooks on the boom with the slots
on the projector, and then slide the projector
into place.
NOTE: Hold the projector firmly when
re-attaching it. The projector is the only part
moving. The boom stays stationary.
54 Appendix B: Replacing Your UF55 Projector Lamp 99-00964-20 A0