Powerstate Control
Allows the projector to turn on or off and switch between other related controls.
Command
on
off [off option]
get powerstate
NOTE: You must send the off command twice. The first command displays an on-screen message, and the
second command shuts off the system. You must send the second command within 10 seconds of the first,
or the first command times out.
Field
off option
powerstate
40
Response
powerstate=[powerstate]
powerstate=[powerstate]
powerstate=[powerstate]
Possible Values
Now
Powering
On
Cooling
Confirm Off
Idle
Appendix A: Remotely Managing Your Interactive Whiteboard System
Powered Off
yes
yes
yes
Description
This is an optional field, which when
specified shuts down the projector
immediately. If Now isn't specified, a
dialog box appears with the message,
"Press Power Button to Turn off
Projector." A second off command
must be sent within 10 seconds to
completely turn off the projector or else
the projector doesn't turn off.
This indicates the projector's current
powerstate.
NOTE: Confirm Off, as listed under the
Possible Value list in the table, is a
non-selectable powerstate that is
returned during stage one of the two
button off sequence.
99-00964-20 A0