Smart Technologies Parts Kit for SMART Board 560 Configuration And User's Manual page 27

3. Pass the ECP cable through the boom. The upper portion of the ECP cable is too thick to fit inside the cable
slot. Put all the cables on the thinner portion of the ECP in the cable slot to the left instead.
4. Set up the ECP cabling by connecting each section separately.
a. Connect the S-Video and two Audio cables from the ECP to the receptacles in section A.
b. Connect the Video and two Audio cables from the ECP to the receptacles in section B.
c. Connect the Audio 2 and Computer 2 VGA cables to the receptacles in section C.
99-00964-20 A0 Connecting Your Interactive Whiteboard System 17