Smart Technologies Parts Kit for SMART Board 560 Configuration And User's Manual page 35

Menu Options
The menu heading at the top of all settings is SMART UF55 Settings.
Menu Heading
Image Adjustment
Audio Control
99-00964-20 A0
Settings Description
Display Mode This option adjusts the display output to User, sRGB, Dark
Classroom and Bright Classroom.
Brightness This option adjusts projector brightness from 0 to 100.
Contrast This option adjusts projector contrast from 0 to 100.
Frequency This option adjusts the frequency of the projected image from -5 to 5.
Default is set to 0. This setting applies to the VGA inputs only.
Tracking This option synchronizes your display timing with your computer's
graphic card from 0 to 31. This setting applies to the VGA inputs only.
H-position This option adjusts the horizontal position of the projected image from
0 to 100.
NOTE: Don't adjust this option unless advised to do so by a certified
SMART Technical Support Specialist. These settings can be applied
only after you make all other changes to the boom. This setting
applies to the VGA inputs only.
V-position This option adjusts the vertical position of the projected image from
-5 to 5.
NOTE: Do not adjust this option unless advised to do so by a certified
SMART Technical Support Specialist. These settings can be applied
only after all other changes to the boom are made. This setting
applies to the VGA inputs only.
Saturation This option adjusts the image from black and white to saturated color
from 0 to 100. This setting applies to the S-video and Composite
inputs only.
Sharpness This option adjusts projector contrast from 0 to 31. This setting applies
to the S-video and Composite inputs only.
Tint This option adjusts the image color balance of red and green from
0 to 100. This setting applies to the S-video and Composite
inputs only.
White Peaking This option adjusts the image color brightness from 0 to 10.
Degamma This option adjusts the color performance of the display from 0 to 3.
Color This option adjusts your individual color settings.
Volume This option increases and decreases volume from -20 to 20.
Using Your Interactive Whiteboard System 25