Smart Technologies Parts Kit for SMART Board 560 Configuration And User's Manual page 63

3. Pull up on the handle of the old lamp.
Don't touch any part of the lamp except
the housing.
4. Remove the old lamp. Recycle or dispose
of the old lamp according to your local
waste authority.
5. Remove the new lamp from all of
its packaging.
6. Put the new lamp into the lamp slot, and
push it all the way down. Tighten the lamp
locking screws until the new lamp
is secure.
99-00964-20 A0 Appendix B: Replacing Your UF55 Projector Lamp 53