Smart Technologies Parts Kit for SMART Board 560 Configuration And User's Manual page 5

• To prevent premature lamp failure or exposure to mercury, always handle the fragile lamp
WARNING
• Failure to follow the installation instructions shipped with your SMART product could result in
• Two people are required to remove and mount the projector and the interactive whiteboard
• When mounting the projector on a framed wall, you must attach both the mounting bracket
• Do not remove any screws other than those specified in the lamp replacement instructions.
• If you remove the bolt supporting the limit strap, the projector's arm will be free to swing.
• To reduce the risk of fire or electric shock, do not expose any component of your SMART
• Do not climb (or allow children to climb) on any part of
• Climbing on the interactive whiteboard or projector arm
• Do not stare (or allow children to stare) directly into the
• Do not touch the head or lens of the projector because it
• Cleaning a boom-mounted projector may result in a fall or injury.
• Don't add extra weight or apply pressure to the UF55 projector boom, the wall-mounted
99-00964-20 A0
assembly with care. Use gloves when touching the lamp. Do not touch the lamp with
your fingers.
personal injury and damage to the product.
on a wall because they might be too heavy for one person to maneuver onto their
wall-mounting brackets.
and safety tether to a stud to safely support the projector's weight. If you use only drywall
anchors, the drywall can fail, resulting in product damage and possible personal injury.
Make sure that the bolt is tightened, and never remove it from the unit without supporting the
projector's arm first.
Board interactive whiteboard system to rain or moisture.
your wall-mounted SMART Board interactive
whiteboard system.
could result in personal injury or product damage.
beam of light created by the projector. Instruct children
not to look in the direction of, or stare at, this beam of
light. Encourage users to keep their back to the projector
when working at the interactive whiteboard. Before they
turn to face the audience, users should step sideways,
out of the projector's beam.
can become extremely hot during normal operation.
interactive whiteboard or its pen tray. SMART Technologies designed the brackets to support
only the weight of the components during normal use.
Important Information iii