Emerson HIGH COUNTRY KF160OI01 Owner's Manual page 11

BP7283, High Country, KF160
8. Connect the white wire from the light
fitter to the white wire from the motor
(Figure 16). Connect the black wire
from the light fitter to the black wire
from the motor. Make sure connectors
are fully engaged.
LIGHT FITTER
ADAPTER
WHITE
WIRE
ADAPTER
PLATE
Figure 16
9. Position the adapter/light fitter assem-
bly over the adapter plate and secure
using three 8-32 x 12mm pan head
screws (Figure 17).
8-32 x 12mm PAN HEAD
SCREW (3)
Figure 17
7/31/06 10:54 AM Page 11
10. Screw in three 60-watt (maximum)
candelabra base bulbs into the light
fitter sockets (Figure 18). Remove and
retain the nut and rubber washer from
the light fitter threaded nipple. Place
the lower glass over the threaded
nipple and secure in place using the
rubber washer and nut. Place the
decorative cap over the threaded
nipple, then screw on the finial nut and
securely tighten.
60-WATTCANDELABRA
BLACK
BASE BULB (3)
WIRE
SOCKET
LOWER GLASS
Figure 18
11. Your ceiling fan is now installed and
wired to be controlled by your remote
control system.
ADAPTER/
LIGHT FITTE
ASSEMBLY
11
LIGHT FITTER
THREADED
NIPPLE
RUBBER WASHER
NUT
DECORATIVE
CAP
FINIAL NUT