Emerson KF200NI00 Owner's Manual
  1. Manuals
  2. Brands
  3. Emerson Manuals
  4. Fan
  5. KF200NI00
  6. Owner's manual
Emerson KF200NI00 Owner's Manual

Emerson KF200NI00 Owner's Manual

Ceiling fan
Hide thumbs
Table of Contents

Advertisement

Quick Links

Emerson Structures
1/24/05
8:22 AM
Page 1
READ AND SAVE THESE INSTRUCTIONS
Emerson Fans
Designed by
STRUCTURES
Ceiling Fan Owner's Manual
Model Numbers
KF200OZ00
KF200NI00
Olde Bronze with
Brushed Nickel with
Black/Teak Blades
Black/Brushed Nickel
Blades
Net Weight:
22.1
Lbs.
Part No. F40BP72850000
Form No. BP7285

Advertisement

Table of Contents
loading

Related Manuals for Emerson KF200NI00

Summary of Contents for Emerson KF200NI00

  • Page 1 Emerson Structures 1/24/05 8:22 AM Page 1 READ AND SAVE THESE INSTRUCTIONS Emerson Fans Designed by STRUCTURES Ceiling Fan Owner's Manual Model Numbers KF200OZ00 KF200NI00 Olde Bronze with Brushed Nickel with Black/Teak Blades Black/Brushed Nickel Blades Net Weight: 22.1 Lbs.
  • Page 2 Emerson Structures 1/24/05 8:22 AM Page 2 WARNING WARNING: To avoid fire, shock, and serious personal injury, follow these instruc- tions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock serv- ice panel disconnecting means to prevent power from being switched on acciden- tally.

  • Page 3: Unpacking Instructions

    Emerson Structures 1/24/05 8:22 AM Page 3 This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Tools Needed for Assembly 1. Open styrofoam unit containing fan. Remove top half of styrofoam unit. One Phillips head screwdriver Remove parts and check to see that One wire stripper...

  • Page 4: Remote Control Procedures

    Emerson Structures 1/24/05 8:22 AM Page 4 2. Remove the fan motor and housing Preset Memory Feature assembly from the protective plastic Your remote control receiver is equipped bag. Place the fan assembly into the with a preset memory feature. The receiv- lower foam pad with the bottom of the er will remember the light intensity and fan motor facing up.

  • Page 5: Electrical Requirements

    Emerson Structures 1/24/05 8:22 AM Page 5 2. Slide the four switch levers on the code WARNING switch to your choice of ON (up) or down positions. Use a ball-point pen or Turning off wall switch is not suffi- cient. To avoid possible electrical small screwdriver and slide the levers shock, be sure electricity is turned off firmly up or down.
  • Page 6 Emerson Structures 1/24/05 8:22 AM Page 6 4. Position the blade flange on the motor be mated correctly (color-to-color) hub so that the screws in the blade before they can be engaged. Make flange align with the two threaded sure the connectors close properly. holes in the motor hub.
  • Page 7 Emerson Structures 1/24/05 8:22 AM Page 7 9. Carefully remove the fan assembly WARNING from the lower foam pad. Turn the fan assembly over and position it on the It is critical that the clevis pin in the lower foam pad with the fan blades motor coupling is properly installed resting on the pad so that the top of and the setscrews securely tight-...
  • Page 8 Emerson Structures 1/24/05 8:22 AM Page 8 (Figure 11). Hold the rod support in ROD SUPPORT GROMMET this position while tightening all six ASSEMBLY decorative rod screws securely. (SCREWS TOWARD SUPPORT TOP) DOWNROD ASSEMBLY COUPLING COVER MOTOR HOUSING DECORATIVE ROD SCREW DECORATIVE Figure 9 ASSEMBLY...

  • Page 9: Your Ceiling Fan How To Hang

    Emerson Structures 1/24/05 8:22 AM Page 9 19. The fan comes with blue, black and 1. Securely attach the hanger bracket to white leads that are 80” long. Before the outlet box using the two screws installing the fan, measure up approxi- supplied with the outlet box (Figure 14).

  • Page 10: How To Wire Your Ceiling Fan

    Emerson Structures 1/24/05 8:22 AM Page 10 How to Wire including ground, and that no bare wire is visible at the wire connectors, except Your Ceiling Fan for the ground wire. If you feel that you do not have enough 2.
  • Page 11 Emerson Structures 1/24/05 8:22 AM Page 11 STANDARD ON-OFF WALL SWITCH OR OPTIONAL SW101 WALL CONTROL BLACK BLACK (HOT) BLACK 120- VOLT WHITE SUPPLY WHITE WHITE GROUND TWO-CONDUCTOR BLUE WHITE CABLE (WITH GROUND) BLACK GREEN WIRE (GROUND) BLUE FROM HANGER BALL AND WHITE HANGER BRACKET Figure 17...

  • Page 12: Operating Your Ceiling Fan

    Emerson Structures 1/24/05 8:22 AM Page 12 8. Place the lower glass into the light fitter, aligning the three flat areas on the top flange of the lower glass with the three pins on the inside of the fitter (Figure 19).

  • Page 13: Maintenance

    Emerson Structures 1/24/05 8:22 AM Page 13 Maintenance Accessories IMPORTANT CARE INSTRUCTIONS 1. Downrod Extension Kits (see store or for your Ceiling Fan catalog). 2. Ceiling Fan Controls (see store or cat- Periodic cleaning of your new ceiling fan is alog).

  • Page 14: Troubleshooting

    Emerson Structures 1/24/05 8:22 AM Page 14 WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN. Trouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not 1. Fuse or circuit breaker 1.
  • Page 15 Emerson Structures 1/24/05 8:22 AM Page 15 Repair Parts Listing Part Numbers Model No. Model No. No. Description KF200NI00 KF200OZ00 Hanger Pack, Consisting of: 761655-38 761655-39 Hanger Bracket — — Hanger Ball — — Downrod — — Parts Bag, Containing:...

  • Page 16: Limited Warranty

    Emerson Structures 1/24/05 8:22 AM Page 16 LIMITED WARRANTY What The Warranty Covers: This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and materials. You must be the original purchaser or user of the product to be cov- ered.

This manual is also suitable for:

Kf200oz00

Table of Contents