Table of Contents
Advertisement
PICTURE menu
PICTURE menu
PICTURE menu
From the PICTURE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
BRIGHTNESS
CONTRAST
GAMMA
(continued on next page)
26
Using the ◄/► buttons adjusts the brightness.
Dark
Light
Using the ◄/► buttons adjusts the contrast.
Weak
Strong
Using the ▲/▼ buttons switches the gamma mode.
1 DEFAULT
1 CUSTOM
6 CUSTOM
6 DEFAULT
5 CUSTOM
To adjust CUSTOM
Selecting a mode whose name includes CUSTOM and then
pressing the ► button or the ENTER button displays a dialog to aid
you in adjusting the mode.
This function is useful when you want to
change the brightness of particular tones.
Choose an item using the ◄/► buttons,
and adjust the level using the ▲/▼ buttons.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the
pattern changes as below.
No pattern
Gray scale of 9 steps
Ramp
The eight equalizing bars correspond to eight tone levels of the test
pattern (Gray scale of 9 steps) except the darkest in the left end.
If you want to adjust the 2nd tone from left end on the test pattern,
use the equalizing adjustment bar "1". The darkest tone at the left
end of the test pattern cannot be controlled with any of equalizing
adjustment bar.
• Lines or other noise might appear on the
screen when this function is operated, but it
is not a malfunction.
Description
2 DEFAULT
5 DEFAULT
Gray scale of 15 steps
2 CUSTOM
3 DEFAULT
3 CUSTOM
4 CUSTOM
4 DEFAULT
Advertisement
Table of Contents
