Using The Automatic Adjustment Feature; Adjusting The Position - Hitachi CPX6 User Manual

Operating

Using the automatic adjustment feature

1.
Press the AUTO button on the remote control.
Pressing this button performs the following.
 For a PC signal
The vertical position, the horizontal position, the horizontal
phase and the horizontal size will be automatically adjusted.
And the aspect ratio will be automatically set to default. Make
sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still
be incorrectly adjusted. Use a bright picture when adjusting.
 For an MIU signal
The aspect ratio will be automatically set to the default.
 For a video signal, s-video signal or component video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for
the VIDEO FORMAT item in the INPUT menu
The vertical position, horizontal position and aspect ratio will be automatically
set to the default. For a component video signal, also the horizontal phase
will be automatically set to the default.
● The automatic adjustment operation requires about 10 seconds. Also please
note that it may not function correctly with some input. When this function
is performed for a video signal, a certain extra such as a line may appear
outside a picture.

Adjusting the position

1.
Press the POSITION button on the remote control.
The "POSITION" indication will appear on the screen.
2.
Use the ▲/▼/◄/► cursor buttons to adjust the picture
position.
When you want to reset the operation, press the RESET button
on the remote control during the operation.
To complete this operation, press the POSITION button again.
Even if you do not do anything, the dialog will automatically
disappear after a few seconds.
● The POSITION button does not work for an MIU signal.
● When this function is performed on a video signal, s-video signal or component
video signal, some image such as an extra-line may appear at outside of the
picture.
● When this function is performed on a video signal, s-video signal, or component
video signal, the range of this adjustment depends on the OVER SCAN in the
IMAGE menu
is set to 10.
8
setting. It is not possible to adjust when the OVER SCAN
(27)
.
(30)
AUTO
COMPUTER/
STORAGE
SEARCH
VIDEO
ASPECT AUTO BLANK
MAGNIFY
PAGE UP VOLUME
HOME
ON
END PAGE DOWN MUTE
OFF
FREEZE MY BUTTON
KEYSTONE
1 2
POSITION MENU
ENTER
RESET
ESC
COMPUTER/
STORAGE SEARCH
VIDEO
ASPECT AUTO BLANK
MAGNIFY
HOME PAGE UP VOLUME
ON
PAGE DOWN MUTE
END
OFF
FREEZE MY BUTTON KEYSTONE
1 2
MENU
POSITION
ENTER
ESC RESET
POSITION