Table of Contents
Advertisement
e-SHOT (Still Image Transfer) Display
The projector can display a still image that is transferred via the network.
Communication Port
(
9)
NOTE
e-SHOT (Still Image Transfer) Settings
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter [https://192.168.1.10] into the address bar of the web browser.
2) Enter the Administrator ID and Password and
click [Logon].
[Port settings] on the main menu.
4) Click the [Enable] check box to open the
[Image Transfer Port (Port: 9716)]. Click the
[Enable] check box for the [Authentication]
setting when authentication is required,
otherwise clear the check box.
[Apply] button to save the settings.
Advertisement
Table of Contents
