Table of Contents
Advertisement
OPTION Menu (continued)
Item
SECURITY
(continued on next page)
This projector is equipped with security functions.
User registration is required before using the security functions.
Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
button. The ENTER PASSWORD box will be
displayed. The factory default PASSWORD is
2400. This PASSWORD can be changed (1.2
Changing the PASSWORD).
• It is strongly recommended the factory default
PASSWORD to be changed as soon as possible.
registered PASSWORD. Move the cursor to
the right side of the ENTER PASSWORD
SECURITY menu. If an incorrect PASSWORD
is input the ENTER PASSWORD BOX will
be displayed again. If incorrect PASSWORD
is input 3 times the projector will turn off.
Afterwards the projector will turn off every time
an incorrect PASSWORD is input.
1.2 Changing the PASSWORD
to select SECURITY PASSWORD CHANGE
NEW PASSWORD BOX.
PASSWORD.
1.2-3 Move the cursor to the right side of the
ENTER NEW PASSWORD BOX and press
AGAIN BOX, enter the same PASSWORD
again.
1.2-4 Move the cursor to the right side of the NEW
button and the NOTE NEW PASSWORD BOX
will be displayed for about 20 seconds, please
make note of the PASSWORD during this time.
Pressing the ENTER button on the remote
controll or INPUT button on the projector will
close the NOTE NEW PASSWORD BOX.
• Please do not forget your PASSWORD.
Description
OPTION Menu
ENTER PASSWORD
BOX
SECURITY MENU
ENTER NEW PASSWORD
BOX
NEW PASSWORD
AGAIN BOX
NOTE NEW
PASSWORD BOX
47
Advertisement
Table of Contents
